RealRankz is reader-supported. When you buy through links on this page, we may earn a commission. As an Amazon Associate I earn from qualifying purchases.
If your sink or countertop has three holes, you have two honest choices: cover two of them with a deck plate and run a single-handle faucet, or use all three with a two-handle faucet or a faucet plus side sprayer. For most kitchens, the best kitchen faucet for a 3 hole sink is the Delta Leland 9178-AR-DST, a pull-down that Delta lists for 1 or 3 hole, 8 inch center installs with the deck plate in the box. If you want to keep a sprayer in one of those holes, the Moen Chateau 7434 mounts the faucet and a side spray on one deck plate.
Every pick below was checked live on Amazon on November 20, 2026. Hole counts, deck plates, reach and flow rates come from the listings and manufacturer details, not from our own lab. We do not print prices because they change daily. The remodeling section at the bottom covers what goes wrong on granite and quartz. For more kitchen guides, see the RealRankz Kitchen hub.

Top Picks at a Glance
| Pick | Best for | Link |
|---|---|---|
| Best overallDelta Leland Pull-Down Kitchen Faucet, Arctic Stainless (9178-AR-DST) | Pull-down, deck plate included, fits 1 or 3 hole 8 inch centers | Check Price on Amazon |
| Best valueMoen Adler Pulldown Kitchen Faucet, Spot Resist Stainless (87233SRS) | 1 or 3 hole with included deck plate, Spot Resist finish | Check Price on Amazon |
| Best with a side sprayerMoen Chateau Low-Arc Faucet with Side Sprayer in Deck Plate, Chrome (7434) | Faucet and side spray share one deck plate across all 3 holes | Check Price on Amazon |
| Best two-handlePfister Pfirst Series 2-Handle High Arc Kitchen Faucet, Stainless (G136-200S) | A true 3-hole widespread faucet with ceramic disc valves | Check Price on Amazon |
| Best budgetFORIOUS Pull-Down Kitchen Faucet with 10 Inch Deck Plate, Brushed Nickel | 10 inch deck plate for 1 or 3 holes, max deck thickness listed | Check Price on Amazon |
More picks in this guide:
- Best modern pull-down: Delta Lenta Pull-Down Kitchen Faucet, SpotShield Stainless (19802Z-SP-DST)
- Best traditional pull-down: Moen Conneaut Pulldown Kitchen Faucet, Spot Resist Stainless (87801SRS)
- Best if you have a 4th hole: Moen Edison High Arc Faucet with Side Sprayer and Soap Dispenser (87042SRS)
- Keep your faucet, cover the holes: BWE 10 Inch Brushed Nickel Deck Plate for 3-Hole Sinks
Cover the Holes or Use Them? Decide This First
A 3 hole sink is usually drilled for a faucet in the middle and handles or accessories on each side, with the two outer holes 8 inches apart center to center. That 8 inch spacing is exactly what the Delta and Moen deck plates in this guide are made for. Before you buy anything, measure from the center of the left hole to the center of the right hole. If it is not 8 inches, confirm the plate will cover your holes before you buy.
- Cover them with a single-handle faucet and a deck plate. It looks cleaner, there is one valve to maintain, and a pull-down sprayer replaces the old side spray.
- Use them with a two-handle widespread faucet, or a single-handle faucet plus a side sprayer or soap dispenser. This keeps a traditional look and gives you a separate sprayer hose that is not part of the spout.
Comparison Table
| Faucet | Type | Holes it fits | Deck plate | Listed reach | Listed flow |
|---|---|---|---|---|---|
| Delta Leland Pull-Down Kitchen Faucet | Pull-down, 1 handle | 1 or 3 (8 in centers) | Included | 9.13 in | 1.8 gpm |
| Moen Adler Pulldown Kitchen Faucet | Pull-down, 1 handle | 1 or 3 | Included | 7.55 in | 1.5 gpm |
| Moen Conneaut Pulldown Kitchen Faucet | Pull-down, 1 handle | 1, plus plate for 3 | Included | 7.88 in | 1.5 gpm |
| Delta Lenta Pull-Down Kitchen Faucet | Pull-down, 1 handle | 1 or 3 (8 in centers) | Included | 9.13 in | 1.8 gpm |
| Moen Chateau Low-Arc Faucet with Side Sprayer in Deck Plate | Low arc, side spray | 3 on one deck plate | Built in | 9.13 in | 1.5 gpm |
| Moen Edison High Arc Faucet with Side Sprayer and Soap Dispenser | High arc, side spray, soap dispenser | 3 or 4 | None needed | 8 in | 1.5 gpm |
| Pfister Pfirst Series 2-Handle High Arc Kitchen Faucet | High arc, 2 handles | 3 (widespread) | None needed | Not listed | 1.75 gpm at 60 psi |
| FORIOUS Pull-Down Kitchen Faucet with 10 Inch Deck Plate | Pull-down, 1 handle | 1 or 3 | 10 in, included | 8.27 in | 1.8 gpm |
The Best Kitchen Faucets for a 3 Hole Sink
1. Best overall: Delta Leland Pull-Down Kitchen Faucet, Arctic Stainless (9178-AR-DST)
Best for: Most kitchens moving from an old 3-hole faucet to a single-handle pull-down.
The Leland is the safe pick for a 3 hole sink because Delta designed the install around it. The listing says it fits 1 or 3 hole, 8 inch center installations with an optional deck plate that ships in the box, so you are not buying a separate cover plate and hoping the finish matches.
Delta’s Diamond Seal valve is the other reason. Delta says the diamond-embedded ceramic disc reduces leak points and lasts twice as long as the industry standard. MagnaTite docking uses a magnet to hold the spray head in the spout.
What the listing confirms:
- Fits 1 or 3 hole, 8 inch center installs, deck plate included
- Spout reach 9.13 inches, flow rate 1.8 gpm
- Diamond Seal ceramic disc valve and ShieldSpray mode
- Delta Lifetime Limited Warranty on faucet and finish
Watch for: It is a tall gooseneck. Check the spec sheet height against any window sill or shelf behind the sink (see the remodeling section).
2. Best value: Moen Adler Pulldown Kitchen Faucet, Spot Resist Stainless (87233SRS)
Best for: Anyone who wants a reliable name-brand pull-down and a deck plate without paying for the top tier.
The Adler is one of Moen’s most popular entry pull-downs, and the listing is clear about the part that matters here: it installs in 1 or 3 hole configurations with the deck plate included.
The listed reach is shorter than the Delta, so it suits a standard sink better than an oversized basin.
What the listing confirms:
- Installs in 1 or 3 hole configurations, deck plate included
- Spout reach 7.55 inches, flow rate 1.5 gpm
- Listed mounting hole diameter 1.5 inches
- Disc valve, Moen Limited Lifetime Warranty
Watch for: Amazon lists the body material as zinc, which is common at this level.
3. Best with a side sprayer: Moen Chateau Low-Arc Faucet with Side Sprayer in Deck Plate, Chrome (7434)
Best for: People who like a separate side spray and want all three holes used, not hidden.
The Chateau 7434 is a single-handle, low-arc faucet that sits on its own deck plate with a side sprayer built into the same plate. The listing title calls it a deck plate for a 3-hole setup, and the bullets confirm the side spray is included.
A low arc is also the answer when there is a window right behind the sink. A tall gooseneck can block a sash or crank.
What the listing confirms:
- Single handle with side spray mounted in the deck plate, 3-hole setup
- Spout reach 9.13 inches, flow rate 1.5 gpm
- Disc valve, Moen Limited Lifetime Warranty
- Listed as ADA compliant
Watch for: Chrome shows water spots, and a few reviewers mention the faucet seating unevenly in the plate. Dry fit it first.
4. Best two-handle: Pfister Pfirst Series 2-Handle High Arc Kitchen Faucet, Stainless (G136-200S)
Best for: Traditional kitchens where you want separate hot and cold handles and no deck plate at all.
If your 3 holes were drilled for a widespread faucet and you like that look, the Pfister Pfirst Series uses all three holes the way they were meant to be used. Amazon lists it as a 3 hole, widespread install with two handles and a 360 degree swivel spout.
Pfister lists quarter turn ceramic disc valves with its Pforever Seal and a never leak guarantee, and the flow is listed at 1.75 gpm at 60 psi.
What the listing confirms:
- 3-hole widespread installation, 2 handles
- Quarter turn ceramic disc valves, 1.75 gpm at 60 psi
- 360 degree swivel high arc spout
- Pfister lifetime warranty per the listing
Watch for: No sprayer. If you want one, choose the Chateau or Edison instead. Confirm your hole spacing matches Pfister’s widespread spec before you order.
5. Best budget: FORIOUS Pull-Down Kitchen Faucet with 10 Inch Deck Plate, Brushed Nickel
Best for: Rentals, laundry rooms, flips, and anyone replacing a failed faucet on a tight budget.
FORIOUS is not a plumbing house name, but this listing gives the measurements a 3 hole install needs, which many budget faucets skip. It lists a 10 inch deck plate for 1 or 3 hole sinks, a mounting hole range of 1.30 to 1.38 inches, and a maximum deck thickness of 1.5 inches. That last number matters on stone countertops, covered below.
It lists cUPC and NSF/ANSI/CAN 61 certification, a 304 stainless body, PEX supply lines and a ceramic cartridge.
What the listing confirms:
- Deck plate included for 1 or 3 hole sinks
- Spout reach 8.27 inches, flow rate 1.8 gpm, 18 inch pull-down hose
- Max deck thickness 1.5 inches, mounting hole 1.30 to 1.38 inches
- 2 year manufacturer warranty, cUPC and NSF 61 listed
Watch for: A much shorter warranty than Delta, Moen or Pfister. For a forever kitchen, spend more.

6. Best modern pull-down: Delta Lenta Pull-Down Kitchen Faucet, SpotShield Stainless (19802Z-SP-DST)
Best for: Modern and transitional kitchens that want a clean, squared-off look on a 3 hole sink.
The Lenta shares the Leland’s install story: Delta lists it for 1 or 3 hole, 8 inch center installs with the deck plate included, plus Diamond Seal and ShieldSpray. The difference is the shape. Lenta is straighter and more modern, and the SpotShield Stainless finish is aimed at kitchens with hard water.
What the listing confirms:
- Fits 1 or 3 hole, 8 inch center installs, optional deck plate included
- Spout reach 9.13 inches, flow rate 1.8 gpm
- Supply lines included, Diamond Seal valve
- Delta Lifetime Limited Warranty
Watch for: Square styling shows a crooked deck plate. Set it square to the backsplash.
7. Best traditional pull-down: Moen Conneaut Pulldown Kitchen Faucet, Spot Resist Stainless (87801SRS)
Best for: Classic kitchens with softer curves, and anyone who wants Moen’s Duralock quick connect.
The Conneaut is a traditional style pull-down from Moen. Amazon lists it with a deck plate and flexible supply lines with 3/8 inch compression fittings in the box, so it covers a 3 hole sink and connects to standard shutoff valves without adapters.
Duralock quick connect makes the hose hookup faster under a cramped sink.
What the listing confirms:
- Deck plate and 3/8 inch compression supply lines included
- Spout reach 7.88 inches, flow rate 1.5 gpm
- Duralock quick connect, Reflex docking
- Spot Resist Stainless finish
Watch for: Amazon’s hole count field says 1, with the deck plate supplied for covering extra holes. Confirm the plate size against your hole spacing.
8. Best if you have a 4th hole: Moen Edison High Arc Faucet with Side Sprayer and Soap Dispenser (87042SRS)
Best for: Sinks and countertops with 3 or 4 holes where you want a side sprayer and a soap dispenser.
The Edison uses the holes instead of hiding them. The listing includes a separate side sprayer and a soap dispenser and says it fits 3 or 4 hole installs. On a 3 hole sink you can leave the dispenser off, and one Amazon reviewer notes doing exactly that.
What the listing confirms:
- Side sprayer and soap dispenser included
- Fits 3 or 4 hole installations
- Spout reach 8 inches, flow rate 1.5 gpm
- Moen Limited Lifetime Warranty
Watch for: The side spray hose needs room under the sink to slide. Keep it clear of garbage disposal wiring and filters.
9. Keep your faucet: best deck plate: BWE 10 Inch Brushed Nickel Deck Plate for 3-Hole Sinks
Best for: Anyone who already owns a single-hole faucet that came without a plate.
If you bought a single-hole faucet without a deck plate, or the included plate is the wrong finish, a separate plate solves it. The BWE plate is 10 inches long, made of stainless steel with a brushed nickel finish, and the listing says it fits 8 inch centers. A foam pad underneath helps keep water from getting under it.
What the listing confirms:
- 10 inch plate for 3 hole sinks, fits 8 inch centers
- Stainless steel with brushed nickel finish
- Foam gasket pad underneath
- Listed mounting hole about 1.34 inches
Watch for: A generic plate may not line up perfectly with a faucet base from another brand. Dry fit before you seal.
Buying Guide: How to Choose a Faucet for a 3 Hole Sink
Sizing and hole count
Count every hole, including any under an old soap dispenser or air gap. Then measure the outer hole spacing, center to center. Also check the hole diameter. Faucet listings give a mounting hole size, such as the 1.30 to 1.38 inch range FORIOUS lists or the 1.5 inch figure on the Moen Adler listing. If your hole is smaller than the faucet needs, it is a job for a fabricator, not a drill from the garage.
Spout reach and height vs the window and cabinets
Reach is how far the spout projects. Compare it to the distance from the faucet hole to the middle of the sink. Height is where people get burned. A tall gooseneck can hit an open casement window, a tilt-in sash, or a shelf above the sink. Measure from the countertop to the lowest thing above or behind the faucet and compare it to the overall height on the manufacturer spec sheet, not the product title.
Finish durability
Brushed finishes like Delta Arctic Stainless and Moen Spot Resist Stainless hide water spots and fingerprints better than polished chrome. If your water leaves white rings on glasses, it will do the same to chrome. Avoid abrasive pads on any finish.
Cartridge type
Every faucet in this guide uses a ceramic disc valve or cartridge according to its listing, which is what you want. Name brands make replacement cartridges easy to find. Budget brands usually do not.
Supply lines and install notes
- Most faucets connect to shutoff valves with 3/8 inch compression fittings. The Moen Conneaut lists exactly that in the box.
- If your shutoff valves are old, crusty or do not shut off fully, replace them while the faucet is out. It costs little compared to a leak later.
- Turn the water on slowly and check each connection with a dry paper towel.
From the Remodeling Side: Putting a Faucet on Stone Countertops
This is the part most faucet reviews skip, and it is where a good faucet can still end up looking bad. On a drop-in sink, the faucet holes are in the sink deck. On an undermount sink, which is what most granite and quartz kitchens have, the holes are drilled through the countertop itself. That changes what you can and cannot fix later.

Deck plate vs hole count on stone
- A deck plate covers holes, but it needs a flat surface to sit on. Set the plate on dry and look for gaps behind the sink cutout before you seal it.
- Do not use regular oil-based plumber’s putty under a plate or faucet base on natural stone. It can leave an oily stain in porous granite and marble. Use the gasket that comes with the faucet, a stain-free putty made for stone, or silicone, following the faucet manufacturer’s instructions.
- Watch the countertop thickness. Many stone tops are about 3 cm thick, and a deck plate plus gasket adds height to the stack. Check the faucet’s maximum deck thickness, like the 1.5 inches FORIOUS lists, so the mounting nut can still grab underneath.
Pre-drilled holes in quartz and granite
- Holes in stone are usually drilled by the fabricator before or during install. Decide on the faucet before the countertop template, so the shop drills the right number of holes at the right spacing.
- If you want a single-hole faucet with no plate, tell the fabricator to drill one hole. You cannot fill extra holes in quartz or granite invisibly later, so a plate becomes permanent.
- Adding a hole later is possible with a diamond core bit, but drilling near the sink cutout, a seam, or the back edge risks cracking the slab. That is a job for the fabricator or a pro who drills stone, not a regular drill bit.
- Ask where the holes will sit relative to the sink cutout. Too close to the cutout weakens the stone, and too far back crowds the backsplash.
Soap dispenser holes
A soap dispenser or filtered water tap needs its own hole, which makes a 4 hole layout. If you are getting new countertops, decide now whether you want one. If you are keeping your counter and it has 3 holes, you can run a single-hole faucet on a plate in the middle and leave a side hole for a dispenser only if your plate is made to leave that hole open. Most 10 inch plates cover all three, so plan on a separate dispenser hole or none.
Clearance to the backsplash and window
- Single-handle faucets need room for the handle to swing back to full hot or cold. If the faucet sits close to a tile or stone backsplash, the handle can hit it. Manufacturer spec sheets show the handle swing, so check it against the space you have.
- Pull-down faucets with tall spouts can block a window sash or crank. Measure the height to the sill and compare it with the overall height on the spec sheet.
- Leave enough deck behind the faucet to wipe, or standing water will stain the caulk line.

Matching finish to cabinet hardware
- Choose the faucet first, then buy cabinet pulls to match it.
- Brushed nickel, brushed stainless and satin nickel can look different side by side. If they sit within a few feet of each other, buy from the same brand or order samples.
- The same thinking applies to countertop appliances. Our electric kettle guide covers where a kettle should sit relative to the sink and the outlets so steam and drips stay off the cabinets.
How We Picked
We started from what people actually search when they have a 3 hole sink: covering holes with a deck plate, keeping a side sprayer, and two-handle widespread faucets. We checked each Amazon listing on November 20, 2026 for availability, published hole count, deck plate inclusion, spout reach, flow rate, valve type and warranty. We used listing and manufacturer details. We do not claim hands-on testing, we do not invent ratings, and specs can change, so confirm on the spec sheet before you buy.
FAQ
Can you put a single-hole faucet on a 3 hole sink?
Yes. Use a deck plate that covers the two outer holes. Several faucets in this guide, including the Delta Leland, Delta Lenta and Moen Adler, include one and are listed for 1 or 3 hole installs.
What is the standard spacing for a 3 hole kitchen sink?
Most are 8 inches between the centers of the outer holes. That is the spacing Delta lists for its included deck plates. Measure yours before you buy.
Can you put a 3 hole faucet on a 1 hole sink?
Not without drilling. On a stone countertop that means a fabricator with a diamond core bit. In most cases it is easier to choose a single-hole faucet.
Do I need plumber’s putty under a deck plate on granite?
Not regular oil-based putty, which can stain porous stone. Use the included gasket, a stain-free putty rated for stone, or silicone as the faucet instructions allow.
Which finish hides water spots best?
Brushed spot resistant finishes. Polished chrome shows spots most.
Bottom Line
For most 3 hole sinks, get the Delta Leland 9178-AR-DST and use its included deck plate. Get the Moen Adler if you want the same idea for less, the Moen Chateau 7434 if you want to keep a side sprayer, or the Pfister Pfirst if you want a classic two-handle look. Measure your hole spacing and the clearance to your window and backsplash first, and if you have stone countertops, seal with the right material.











